讯海轴承/SKF/圆柱滚子轴承/NCF 2968 V

SKF NCF 2968 V 圆柱滚子轴承 340×460×72 mm斯凯孚 · 瑞典

圆柱滚子轴承 · 主要尺寸 340×460×72 mm

SKF NCF 2968 V 圆柱滚子轴承

关键尺寸

340内径 d / mm
460外径 D / mm
72宽度 B / mm

资料下载

SKF NCF 2968 V 技术参数

尺寸
SKF NCF 2968 V 尺寸示意图
孔径340 mm
外径460 mm
宽度72 mm
孔径340 mm
外径460 mm
宽度72 mm
内圈挡边直径378.5 mm
外圈挡边直径421 mm
外圈滚道直径431 mm
正常位置轴承套圈相对于其他套圈允许轴向位移5 mm
倒角尺寸3 mm
性能
基本额定动荷1190 kN
基本额定静负荷2500 kN
参考转速560 r/min
极限转速700 r/min
属性
轴承部件整套轴承
轴向位移能力一个方向上
列数1
定位特征,轴承外圈不带
孔类型圆柱孔
保持架不带
设计不可分离
法兰数量,外圈1
挡边数量,内圈2
活套法兰无
径向游隙CN
公差等级正常
涂层不带
密封不带
润滑剂无
补充润滑功能不带
可修复产品是
新产品的指示性碳足迹129 kg CO<sub>2</sub>e
再制造产品的指示性碳足迹43 kg CO<sub>2</sub>e
挡肩尺寸
SKF NCF 2968 V 挡肩尺寸示意图
轴挡肩直径353 mm
轴挡肩直径373 mm
轴承座挡肩尺寸447 mm
轴承座挡肩尺寸447 mm
倒角半径2.5 mm
数据计算
基本额定动荷1190 kN
基本额定静负荷2500 kN
疲劳载荷限值228 kN
参考转速560 r/min
极限转速700 r/min
计算系数0.2
极限值0.3
计算系数0.4

产品说明

Single row full complement cylindrical roller bearings are designed to accommodate very high radial loads in combination with moderate speeds. The bearings incorporate a maximum number of rollers as they are not equipped with a cage. Having two integral flanges on the inner ring and one flange on the outer ring, NCF design bearings can accommodate axial displacement in one direction. A retaining ring on the outer ring holds the bearing together. The retaining ring should not be loaded axially during operation. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings.

尺寸图纸

SKF NCF 2968 V 尺寸图纸

点击图纸可放大查看,再次点击关闭。

同尺寸其他型号

以下型号与 SKF NCF 2968 V 的主要尺寸相同(d 340 × D 460 × B 72 mm),可用于同尺寸替代选型。

同系列相近型号